Walter ICECUT™ Annular Cutters, Weldon Shank, 1" Length
Walter Surface Tech Logo

Walter ICECUT™ Annular Cutters, Weldon Shank, 1" Length

$44
$44
Sold Out
Only 2 left!

Walter ICECUT™ Annular Cutters

 

Made for cutting hard tensile materials and hard to lubricate areas

1" Length, AICrN Anti-Friction Coating, Weldon Shank

The new ICECUT™ annular cutters are coated with an exclusive mixture of chromium and aluminum (AICrN) and are designed to be used where lubricants are not permitted or problematic to apply. This new technology outperforms any Titanium (TiN) or Titanium-Aluminum (TiAIN) coating cutters. By incorporating a chromium aluminum blend into the coating. Walter ICECUT annular cutters can withstand at least 200 degrees Celsius higher temperatures and produce less heat than a conventional TiAIN cutter. This exclusive coating makes the ICECUT™ more resistant to higher stress under load and instant impact.

Must be used with pilot pin 05-Z 001

Features:

  • Fully ground extra large flutes
  • Modern tooth design and cutter geometry
  • New high technology coating
  • Weldon shank
  • 1" Max Cutting Depth

For cutting the following materials;

  • Aluminum
  • Stainless steel
  • Steel
  • Structural Steel

RPM Chart

Options:

Diameter Part No.
1/2" (12.7 mm) 05-B 008
9/16" (14 mm) 05-B 009
5/8" (16.0 mm) 05-B 010
11/16" (17.5 mm) 05-B 011
3/4" (19.0 mm) 05-B 012
3/16" (20.6 mm) 		05-B 013
7/8" (22.2 mm)
05-B 014
15/16" (23.8 mm)
05-B 015
1" (25.4 mm) 05-B 100
1-1/16" (27 mm) 05-B 101
1-1/8" (28.6 mm) 05-B 102
1-3/16" (30.2 mm)  05-B 103
1-1/4" (31.8 mm) 05-B 104
1-5/16" (33.3 mm) 05-B 105
1-3/8" (34.9 mm) 05-B 106
1-7/16 " (36.5 mm) 05-B 107
1-1/2" (38.1 mm)  05-B 108
1-9/16" (39.7 mm) 05-B 109
1-5/8" (41.3 mm) 05-B 110
1-3/4" (44.5 mm) 05-B 112
1-13/16 " (46 mm) 05-B 113
1-7/8" (47.6 mm) 05-B 114
1-15/16" (49.2 mm) 05-B 115
2 " (51 mm) 05-B 200
2-1/16 " (52.4 mm) 05-B 201
2-1/8 " (54 mm) 05-B 202