ESAB 308L Stainless Steel OK®TIGROD

OK Tigrod 308L has a good general corrosion resistance. The alloy has a low carbon content which makes this alloy particularly recommended were there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. For joining of stainless steels of 18% Cr - 8% Ni-type with low carbon content and Nb-stabilized steels of the same type if the service temperature will not exceed 350°C. Can also be used for welding of Cr-steels except in sulphur rich environments.

Wire Diameters and Part Numbers

• 1/16" (1.6mm) - 161016R150
• 3/32" (2.4mm) - 161024R150
• 1/8" (3.2mm) - 161032R150

Available in 11 lb (5kg) cartons - Rods are cut at 39.4" (1000mm) length

Documents, specs and fact sheet